图片提示词案例

实战案例:用AI提示词生成紫砂壶电商主图,从陶土颗粒质感到5版迭代

发布时间:2026年11月18日 08:27:00

以一款宜兴紫砂西施壶的电商主图为真实场景,演示如何用 Flux 处理「紫砂泥料颗粒 + 半哑光包浆 + 茶汤反光」三者的关系,重点解决泥料的砂感与颜色层次、壶身弧面高光的走向、壶嘴壶把的结构正确性,以及暗调背景下的产品分离。


背景

需求来自一个宜兴紫砂品牌:要做西施壶的详情页主图,卖点是「原矿底槽清泥料 + 手工全手工」。

紫砂的难点很特别——它不是「像不像一把壶」,而是**「像不像紫砂」**:

  1. 砂感:泥料里有颗粒,表面不是光滑的;
  2. 包浆:用过的好壶有温润的光,不是新壶的贼光;
  3. 弧面:壶身是圆柱变体,高光是一条竖向的带,不是圆点。

工具用 Flux。

第一步:把「砂感」拆成颗粒尺寸与分布

只说 purple clay 或 zisha,模型给的是陶土花盆。必须量化:

维度描述提示词
颗粒细微砂粒,0.2–0.5 毫米fine sand grains, roughly 0.2 to 0.5 mm
分布不均匀,局部聚集unevenly distributed, clustered in places
视觉只在掠射光下可见visible only under grazing light
整体半哑光,不是砂纸semi-matte, not abrasive
Surface of Yixing zisha clay: fine sand grains roughly 0.2 to 0.5 mm,
unevenly distributed, visible mainly under grazing light along the
curved wall. Semi-matte finish with a soft, warm sheen — not glossy,
not abrasive like sandpaper, no plastic feel.

踩坑一:V1 写 textured clay surface,生成的是粗糙的陶罐,颗粒粗到像混凝土。量化到 0.2–0.5 毫米并加上 semi-matte 后,砂感才对。

第二步:包浆是「温润」,不是「反光」

紫砂的贵气来自包浆:一层薄薄的、温润的光泽。这里最容易翻车——写 shine 就成了釉面瓷。

A gentle patina: a thin, soft luster that follows the curvature of
the body, brightest along the shoulder, fading toward the base.
No mirror reflection, no sharp highlight, no glaze, no wet look.
The clay still reads as porous under the luster.

四个要点:

  • follows the curvature:光是顺着弧面走的;
  • no sharp highlight:不要锐利高光;
  • no glaze:明确排除釉面;
  • still porous:光泽之下仍要看得出泥料的孔隙。

踩坑二:V2 的壶身像上了釉,反光锐利。加 no glaze + no sharp highlight 后,才回到紫砂的哑光温润。

第三步:结构正确性比质感更难

AI 画壶最容易错的是壶嘴与壶把的连接。西施壶的特征是短嘴、倒把、圆腹。

Shi Piao (Xi Shi) shape: a round, slightly squat body, a short tapered
spout rising at about 45 degrees with a clean lip, and an inverted
C-shaped handle joining the body at the shoulder and the lower belly.
The lid sits flush with a slightly domed knob. Spout and handle are
attached to the body, not floating, no extra parts.

关键判断:写形状名(Shi Piao / Xi Shi)能显著提高结构正确率,但必须配上几何描述,否则模型只记住了「圆」。

踩坑三:V3 的壶把是悬空的,没有接到壶身。加上 attached to the body, not floating 后,结构问题基本消失。

第四步:暗调背景与光位

Product shot on a dark warm-grey background with a soft gradient,
no props. Lighting: one large softbox from the upper left at a low
angle to graze the clay surface, plus a subtle fill from the right
so the shadow side keeps detail. No hard specular highlights.
Camera: 85mm lens, f/11, slight three-quarter view so both the spout
profile and the body curve are visible.

三个要点:

  • 低角度侧光:掠射才能显出砂感;
  • 右侧补光:暗部保留细节,不要死黑;
  • f/11 + 85mm:全壶清晰,且透视不失真。

第五步:五版迭代

版本改动结果
V1只写紫砂壶陶罐质感,结构错
V2量化砂感 + 半哑光泥料对了,反光像釉
V3加包浆描述 + 结构名光泽对了,壶把悬空
V4加几何结构 + 连接约束结构正确,背景偏亮
V5背景改暗暖灰 + 加掠射光最终版

V5 还做了一处微调:壶内不拍。紫砂壶内壁的接缝痕迹是鉴伪重点,但 AI 生成的内壁几乎必然出错,所以主图只拍外观,内壁留给实拍细节图。

成果与复盘

最终主图用于详情页首屏,另裁 1:1 用于直通车。

复盘最有用的一条:传统器物类产品,「结构」比「质感」优先。质感不对只是不好看,结构不对就是错货——壶嘴角度、壶把连接、盖口齐平,任何一处错了都会被懂行的买家立刻发现。

成本拆解:

项目支出
Flux 生成(约 80 次抽图)约 60 元
后期(结构微调、去瑕疵)约 320 元
合计约 380 元

6 条可复用清单

  1. 砂感要量化:颗粒 0.2–0.5 毫米 + 只在掠射光下可见。
  2. 包浆是「薄光」不是「反光」:no sharp highlight、no glaze。
  3. 形状名 + 几何描述一起写,结构正确率显著提升。
  4. 明确「连接」:attached, not floating,防悬空结构。
  5. 掠射侧光显质感:低角度主光 + 右侧补光。
  6. 避开 AI 的必然弱项:内壁、刻字这类细节交给实拍。