图片提示词案例

实战案例:用AI提示词生成智能手表运动电商主图,从金属拉丝质感到5版迭代

发布时间:2026年11月16日 08:39:23

以一款主打运动的智能手表电商主图为真实场景,演示如何用 Flux 完成「金属拉丝表壳 + 秒表界面 + 水珠飞溅」的组合,重点解决金属拉丝的纹理方向、屏幕发光的可控性、水珠的物理形态,以及产品与背景的分离。


背景

需求来自一家做运动手表的品牌:要一张主图,用于详情页首屏和直通车。

核心诉求三条:

  1. 表壳要有金属拉丝质感,不能是塑料感;
  2. 表盘要显示秒表界面,数字清晰可读;
  3. 环境要有水珠飞溅,传达运动与防水。

难点在于三件事互相干扰:拉丝纹理会抢屏幕的注意力,水珠容易糊住表盘,金属反光容易过曝。

工具用 Flux。

第一步:把「金属拉丝」拆成三个参数

「metal brushed」这个词太笼统,模型给的结果要么是镜面,要么是磨砂。必须拆开:

参数取值提示词
纹理方向单向平行parallel linear grain
纹理密度细密fine grain, not coarse
表面反射柔和的各向异性高光anisotropic highlight along the grain
A smartwatch case in brushed titanium with fine parallel linear grain
running horizontally. Anisotropic highlight stretched along the grain
direction, not a mirror reflection. Matte micro-texture visible at
the edges where light grazes the surface.

踩坑一:第一版写 brushed metal case,生成的是抛光不锈钢,完全没有纹理。加上 parallel linear grain + fine grain + 明确的光向之后,拉丝才出现。

第二步:屏幕发光要「限制范围」

屏幕是第二个坑。AI 很容易把屏幕画成一块发光的白板,数字糊成一片。

正确做法是三层约束:

The watch face displays a stopwatch interface with clear legible digits:
"00:12:48" in large white numerals, plus two smaller rows of split times.
Screen emits a controlled glow that lights only the bezel's inner edge,
spilling no more than two millimeters beyond the glass.
Text is razor sharp, no bloom, no overexposure on the digits.

三个关键点:

  • 给出具体数字:写 “00:12:48”,模型会照着画;写 stopwatch 只会给个大概;
  • 限制发光半径:no more than two millimeters beyond the glass;
  • 明确 no bloom:不加这句,数字一定发虚。

踩坑二:V1 的数字是「08:88:8」这种乱码。改成明确的 “00:12:48” 后,数字正确率大幅提升,但仍需多抽几次挑图。

第三步:水珠要按物理形态描述

「water splashes」会让模型给一片水雾。水珠的形态必须拆开:

形态描述
主体水珠半球形、贴附在玻璃上
飞溅水珠悬空的椭球,带高光点
水痕表壳边缘的薄水膜
Hemispherical water droplets cling to the crystal glass, each with a
bright specular highlight on its upper left. A few airborne droplets
are frozen mid-flight, elongated ellipsoids, sharply focused.
No mist, no fog, no spray cloud.

踩坑三:不写 no mist、no fog 时,模型 100% 会加一层水雾,把表盘糊掉。

第四步:构图与背景

电商主图的构图有硬性要求:产品占画面 60% 以上、背景干净、有无文字的留白区。

Product photography, three-quarter view, the watch tilted 15 degrees
toward the camera so the case side and the screen are both visible.
Background: seamless gradient from deep graphite (#2A2D31) to near black,
soft falloff, no props, no text.
Left third of the frame left empty for copy overlay.
Studio lighting: one large softbox upper right, one rim light lower left.

两个要点:

  • three-quarter view + 15 度:纯正面看不出表壳厚度,纯侧面看不到屏幕;
  • 左侧留白:后期要放卖点文案,必须在生成阶段就留出来。

踩坑四:V2 背景用了「运动场景虚化」,结果产品被环境吞掉。改回纯色渐变后,产品立刻突出。

第五步:五版迭代

版本改动结果
V1只写 smartwatch product shot塑料感,屏幕糊
V2加拉丝参数 + 具体数字质感对了,背景太乱
V3背景改纯色渐变产品突出
V4加水珠物理描述运动感出现,但有水雾
V5加 no mist/生硬边 + 左侧留白最终版

V5 还做了一件事:把表带上的纹理降低对比度。金属与硅胶两种材质同框时,如果都强调纹理,画面会显得杂乱,所以只让表壳成为视觉重点。

成果与复盘

最终主图用于详情页首屏,同时裁切成直通车所需的 1:1 与 3:4 两个版本。

复盘最有用的一条:电商主图的提示词,本质是一份「约束清单」。产品占多大、光从哪来、哪里留白、什么不能出现,这些比「高级感」「质感」这类形容词有用得多。

成本拆解:

项目支出
Flux 生成(约 60 次抽图)约 45 元
后期修图(数字校正、水珠修补)约 300 元
合计约 345 元

6 条可复用清单

  1. 材质拆成纹理 + 方向 + 反射:brushed 不是一个词能解决的问题。
  2. 屏幕内容给具体字符串:写 “00:12:48”,不要写 stopwatch。
  3. 发光要限半径:two millimeters beyond the glass 这类量化描述最有效。
  4. 水珠按形态分类写:贴附的半球、悬空的椭球、边缘的水膜。
  5. 构图参数化:three-quarter view、15 度倾角、左侧三分之一留白。
  6. 负向约束是必须项:no mist、no fog、no bloom、no text。