实战案例:用AI提示词生成高端精华液产品主图,从玻璃折射到5版迭代
发布时间:2026年11月12日 08:25:57以一个国产护肤品牌的详情页需求为真实场景,演示如何用 Flux 生成高端精华液主图,重点解决厚玻璃瓶的折射与厚度感、滴管液体的黏度表现、金属瓶盖的哑光与镜面区分,以及极简构图中的阴影落位。
背景
一个国产护肤品牌要推一款 30ml 精华液,客单价 480 元,详情页首屏需要一张能「撑住价格」的主图。原来的实拍版本问题很典型:玻璃瓶看起来像塑料、液体像水、瓶盖发黑。
这次用 AI 出图,需求四条:
- 玻璃必须有厚度与折射;
- 液体要有黏度,不是矿泉水;
- 瓶盖金属感要准;
- 背景极简,符合高端定位。
工具用 Flux,半天出图。
第一步:厚玻璃的三条规则
| 规则 | 表现 | 提示词表达 |
|---|---|---|
| 厚度 | 瓶壁有明显边缘厚度与暗边 | thick glass walls with visible edge thickness |
| 折射 | 背景与标签透过瓶身变形 | background refracted and slightly displaced through the glass |
| 高光 | 两条细长垂直高光 | two narrow vertical specular highlights on the glass |
踩坑一:写 glass bottle 时,Flux 给的是薄壁透明塑料感,像矿泉水瓶。加上 thick glass walls 与 edge thickness 后才有「贵」的感觉。
第二步:液体要「有黏度」
精华液和水的区别在流动形态。提示词必须写到流体本身:
A thick translucent amber serum inside a clear glass bottle, with a
slightly viscous body: the liquid surface curves upward where it meets
the glass wall, and a single slow droplet hangs from the glass dropper,
stretched into a thin thread that has not yet broken.
No bubbles, no foam, no floating particles.
三个关键点:
- curves upward at the wall:液面在瓶壁处上翘,是表面张力;
- stretched into a thin thread:滴管液丝未断,是最有说服力的一瞬;
- no bubbles, no foam:气泡与泡沫会立刻拉低档次。
踩坑二:V2 的液体里全是小气泡,看起来像汽水。加 no bubbles 之后解决。
第三步:金属瓶盖的两种质感
瓶盖是最容易翻车的地方:全镜面像廉价香水,全哑光像塑料。
The cap is brushed aluminum with a soft satin finish: a broad diffuse
highlight across the top, a thin bright line along the chamfered edge,
and a subtle radial brushing texture visible only at grazing angle.
Not mirror-polished, not plastic.
三处必须写:
- brushed aluminum + satin finish:拉丝铝 + 缎面;
- thin bright line along the chamfered edge:倒角处的一条亮线,是金属的签名;
- visible only at grazing angle:拉丝纹理只在侧光下可见。
第四步:极简构图与阴影落位
高端护肤品的构图逻辑是「留白 + 一个准确的光」:
Composition: the bottle stands slightly left of center on a seamless
warm off-white surface. A single soft shadow falls to the right rear,
with a soft penumbra and no hard edge. Upper right area is clean
negative space for headline text.
Product photography, 100mm macro, f/11, focus stacked, entire bottle sharp.
为什么用 f/11:产品主图要求「整体清晰」,瓶盖到瓶底都不能虚。大光圈的氛围感在这里是减分项。
踩坑三:V3 的阴影很硬,像打了闪光灯。改成 soft penumbra, no hard edge 之后,才有「棚拍柔光箱」的质感。
第五步:五版迭代
| 版本 | 改动 | 结果 |
|---|---|---|
| V1 | 只写玻璃瓶 | 塑料感,液体像水 |
| V2 | 加厚壁与折射 | 玻璃对了,气泡太多 |
| V3 | 加黏度与液丝 | 液体可信,阴影过硬 |
| V4 | 改柔光阴影 + 金属质感 | 整体成立 |
| V5 | 锁构图与 f/11 | 终版,可直接上架 |
V5 的一个小技巧:在提示词末尾加 color: warm off-white background, amber liquid, silver cap — nothing else。明确限定只有三种颜色,能显著减少模型自作主张加道具。
成果与复盘
主图上架后,详情页首屏停留时长上升,客单价 480 元的产品不再被质疑「凭什么这么贵」。
复盘最有价值的一条:高端感来自「材质的物理正确」,不是来自「高级」这个词。玻璃的厚度、液体的黏度、金属的倒角,这三个细节做到位,价格就站得住。
成本拆解:
| 项目 | 支出 |
|---|---|
| Flux 生成(约 50 次迭代) | 约 75 元 |
| 后期修瑕疵与校色 | 约 150 元 |
| 文案排版 | 约 120 元 |
| 合计 | 约 345 元 |
6 条可复用清单
- 玻璃写厚度与暗边:thick walls + edge thickness。
- 液体写表面张力:液面上翘 + 未断的液丝。
- 金属写倒角亮线:这是金属与塑料的分界。
- 主图用 f/11:整体清晰优先,不要氛围虚化。
- 阴影要柔:soft penumbra, no hard edge。
- 限定三种颜色:主动收窄配色,减少模型加戏。