视频提示词案例

实战案例:用AI提示词制作景德镇青花瓷拉坯短片,从泥料到5个镜头全流程

发布时间:2026年11月11日 12:49:02

以一家景德镇陶瓷工作室的品牌短片需求为真实场景,演示如何用 Veo 3 与即梦完成 35 秒制瓷流程短片的 5 个镜头,重点解决泥土的可塑性、拉坯时手与泥的接触关系、青花钴料的晕散,以及窑火色温的还原。


背景

客户是景德镇一位做了二十年青花瓷的工作室主人。他想拍一支 35 秒的短片,放在工作室入口循环播放,让进店的客人先看懂「一只杯子是怎么来的」。

难点不在设备,而在手感。制瓷是纯手工行业,AI 最容易把它拍成「流水线」:泥是塑料感的、手是假手、青花是印上去的。

工具用 Veo 3(镜头与材质物理) 加 即梦(首帧与试错),三天完成。

第一步:先定「泥的三条物理规则」

拉坯镜头是全片的命门。写提示词前必须锁定泥的物理特性:

规则表现提示词表达
可塑性泥随手的压力变形,不是被雕刻clay yields to finger pressure, deforming smoothly
湿润度表面有水的反光,边缘微微塌陷wet clay surface with soft specular highlights
旋转感坯体在转盘上匀速旋转clay spinning steadily on a potter’s wheel

踩坑一:第一版写 pottery making,Veo 3 给的是「双手捧着一个已经成型的杯子」,跳过了过程。必须写 从泥团开始、逐渐升高 的动作序列。

第二步:手与泥的接触关系要写细

AI 画手最容易出问题,尤其是「手在泥上施加压力」这种精细动作。策略是弱化手的细节,强化接触点:

Close-up of a potter's hands covered in wet clay, thumbs pressing
inward at the base of a rising cylinder on a spinning wheel.
The clay wall thins and rises as the hands move upward slowly.
Water drips down the side, the wheel spins at constant speed.
Only the hands and the clay are in focus, background is a blurred
dim workshop with warm tungsten light.
85mm lens, f/2, shallow depth of field, macro detail on the clay surface.

三个关键点:

  1. thumbs pressing inward at the base:明确压力位置,动作才合理;
  2. wall thins and rises:坯体「变薄升高」是拉坯的唯一证据;
  3. hands covered in wet clay:手上必须有泥,否则像戴着手套。

第三步:青花钴料的晕散是「中式」的关键

青花不是纯蓝,而是钴料在釉下晕开的蓝。这是全片最容易翻车的地方:

A fine brush paints a cobalt blue pattern on an unfired white porcelain
cup. The pigment is slightly watery, its edges bleeding softly into the
porcelain body. Blue is deep indigo, not bright blue, with subtle
variation in density where the brush lifted.
Traditional Chinese brush, held vertically, slow deliberate strokes.

为什么强调 indigo 而不是 blue:写 blue 会得到现代工业蓝;写 deep indigo with density variation,才是青花。

踩坑二:V2 的青花过于锐利,像贴花纸。加上 bleeding softly into the porcelain body 之后,才有了「画上去」的手工感。

第四步:5 个镜头的流程叙事

35 秒 5 个镜头,节奏是「实—实—虚—实—收」:

镜头内容时长运镜
S1泥团落在转盘,双手沾水按压8 秒俯拍固定
S2坯体升高、开口、成型10 秒侧面微推
S3毛笔勾勒青花纹样9 秒极近特写
S4窑门打开,火光映出瓷器轮廓6 秒缓推
S5成品杯置于木桌,光从侧窗落下4 秒固定定格

关键判断:S4 的窑火必须给足色温。窑内是 1300 度的高温,光色偏橙红,写 orange-red glow, heat haze 才真实;写 warm light 会拍成烛光。

踩坑三:S4 第一版窑火太亮,瓷器被过曝成白块。加了 silhouette against the fire glow 之后,反而是全片最有力量的一镜。

第五步:统一质感与五版迭代

全片固定视觉基调:

Consistent look: dim workshop, single warm tungsten source from the
upper left, deep shadows, muted palette of clay grey, indigo and
off-white. Slight film grain, no cool tones, no neon.
Documentary craft-film mood, patient and quiet.
版本改动结果
V1只写 pottery making静态成品,没有过程
V2加旋转与变形约束拉坯动作成立
V3改青花为晕散钴料中式质感出现
V4加窑火轮廓与热浪全片有了高潮
V5统一色调与颗粒五镜一致,成片

成果与复盘

成片在工作室入口循环播放,客人停留时间明显变长,最常被问的一句是「这个真的是 AI 做的?」

复盘最有价值的一条:手工艺短片的核心是「过程」,不是「成品」。观众想看的是泥如何在手里变成器,而不是一个漂亮的杯子。

成本拆解:

项目支出
Veo 3 生成(约 35 次)约 280 元
即梦首帧(约 20 次)约 26 元
环境音与陶轮声采集约 120 元
剪辑调色约 200 元
合计约 626 元

6 条可复用清单

  1. 先定材质规则:可塑性、湿润度、旋转感,决定手工艺短片的可信度。
  2. 拍过程不拍成品:从泥团开始,才有「制作」的说服力。
  3. 手要沾泥:hands covered in wet clay,否则一眼假。
  4. 颜色写具体色相:青花是 deep indigo,不是 blue。
  5. 高温场景写色温与轮廓:orange-red glow + silhouette,避免过曝。
  6. 统一色调压住杂色:clay grey + indigo + off-white,三色足够。